A good work environment, a high level of hygiene and an optimal wash
result make the Metos WD-7 Duplus glass ECO-FLOW -dishwasher one of the
best hood type dishwashers on the market.
The dishwasher has a unique and flexible washing system, in which the
machines water pressure can be reset quickly and easily between normal
and heavily soiled settings. The inner height (505 mm) and width (605
mm) of the hood allows for bigger kitchen equipment to be washed in the
machine, in addition to plates, glass, and cutlery. The Duplus
-technology enables a double final rinse, which reduces the usage of
water. The first final rinse is extremely efficient, and it uses the
recirculated rinse water of the previous washing cycle. In the second
final rinse the dishes are rinsed with fresh water. Thus, only one litre
of fresh water is used per each washing cycle. Even though the usage of
water is reduced significantly, an optimal wash result is still
guaranteed. The Duplus -model also uses considerably less energy and
chemicals compared to the Metos WD-7 -basic model. The machine has a
unique Glasstilt -design, that prevents water from accumulating at the
bottom of the glass. In this way, the manual polishing of the glass ware
can be minimized. In addition, the machine has an ECO-FLOW -steam
condensing unit, which enables heat recovery from the exhausted steam.
In the Metos WD-7 Duplus glass ECO-FLOW -dishwasher the washing cycle
begins when the hood is closed. The washing and rinsing times, as well
as the rinsing temperature, can be programmed to fit your needs. This
enables a separate program for e.g. fine porcelain, which needs a lower
rinse temperature. The machine indicates of too low temperatures and too
low amounts of rinsing water. If the rinsing temperature decreases past
85°C the machine will continue washing, until the right rinsing
temperature is reached. Therefore, the rinsing power is not determined
by the water pressure in the water pipe and thus no additional booster
pump is needed. The wash arms empty themselves from washing water before
the rinsing starts. In this way, the washing water does not drip on to
the clean dishes. The uniquely designed hood prevents the steam from
rising on to the face of the user when the hood is opened.
The digital control panel, that the machine is equipped with, shows the
chosen wash program, temperature and remaining wash time. In addition,
it shows the daily and total amount of washed racks. The machine is
extremely easy to use, and it informs the user of e.g. a closed tap or a
misplaced overflow tube. Furthermore, the machine is easy to keep clean
through its automatic cleaning program. The break function maintains the
temperature of the tank when there is a longer period between each wash.
When using the break function the dishwashers needs to be closed and you
cannot start a washing cycle at the same time.
– water consumption 1,0 l/ wash cycle
– Glasstilt -glass tilting function
– three washing cycles 1,2, 1,8, and 3,3 min.
– free height of the washing area 505 mm
– self-cleaning program
– diagnostics function
– break function
– self-cleaning washing arms
– wash pump 1,1 kW
– pump (recirculated final rinse) 0,67 kW
– pump (final rinse) 0,67 kW
– booster heater 9 kW
– electronic control
– noise and heat insulated
– double water connection hot/cold
– tank volume 52 l
– rack size 500×500 mm
STANDARD EQUIPMENT:
– rinse aid dispenser
– plate rack
– cup rack
– utensil rack
OPTIONAL ACCESSORIES (order separately)
– detergent dispenser for liquid detergent
– HACCP (WEB tool)
– steam hood, which is connected to the machine: steam is released to
the ventilation channel instead of the dishwashing room
– machine with a drain pump
– automatic control of ventilation fan
