Good working environment, excellent hygienic standards and optimal
washing results make the Metos WD-7 Autostart dishwasher one of the best
hood-type dishwashers available in the market.
The Metos WD-7 dishwasher is equipped with a steam condenser which
improves room air quality significantly and saves energy as well. The
steam condenser condenses the steam produced during the final rinsing
cycle. The condenser helps to utilise the heat for warming up the cold
water entering the dishwasher. In this way cool air is expelled into the
premises which helps to improve the room air quality.
The Autostart is the only dishwasher model available in the market with
a fully automatic hood lifting and lowering system. The hood is lowered
and the dishwasher starts automatically when a basket is being pushed
in. The hood lifts automatically at the end of the washing cycle. The
unique structure of the hood prevents steam from rising towards the face
of the user when the hood is being opened. The minimum cold water
pressure in the automatic hood lifting system is 300 kPa.
The bottom washing jet’s pressure may be adjusted to suit washing of
pots and pans which, together with the three washing programmes of the
dishwasher, increase flexibility and make the machine suitable for
various dishwashing needs. The height (505 mm) and width (605 mm) inside
the hood enable washing of plates, glasses and cutlery as well as baking
trays, large bowls, GN dishes and 600×400 transport boxes.
The washing and rinsing times as well as the rinsing water temperature
may be adjusted as necessary which enables creation of an individual
washing programme for example for pans. Alarms for a too low water
temperature and an insufficient amount of rinsing water. If the rinsing
water temperature falls below 85°C, the washing cycle continues until
the required rinsing water temperature has been reached. The dishwasher
checks the availability of sufficient rinsing water capacity for the
final rinsing cycle, and an alarm sounds if there is not enough rinsing
water. Washing water is removed from the washing arms prior to rinsing
to protect clean dishes from the dripping washing water. The unique
structure of the hood prevents steam from rising towards the face of the
user when the hood is being opened.
The chosen programme, temperature and the remaining washing time are
displayed on the control panel. Additionally, the total daily number as
well as the total over-all number of baskets loaded and washed in the
machine are displayed on the control panel. The dishwasher informs the
user of a closed water tap as well as of a detached overflow pipe. The
dishwasher is easy to keep clean with the help of an automatic cleaning
programme. The stand-by function enables maintaining the basin
temperature during longer pauses between wash cycles. When the stand-by
function is on, the hood of the dishwasher is closed and the washing
programme cannot be started.
– automatic lifting and lowering of the hood
– steam condenser (for cold water tap connected dishwashers)
– three washing cycles: 1.2, 1.7 and 3.2 minutes
– free height of the washing area is 505 mm
– automatic cleaning programme
– diagnostics
– stand-by function
– unclogging washing arms
– pump power output 1.1 kW
– booster heater 12 kW
– electronic control
– sound and thermal insulation
– basin volume 52 l
– basket size 500×500 mm
DELIVERY INCLUDES:
– rinse dosage device
– basket for plates
– basket for cups
– cutlery basket
ACCESSORIES (ordered separately)
– liquid washing detergent dosage device
– HACCP (WEB Tool)
– steam hood is installed at the back of the dishwasher preventing the
steam from entering the room
and guides it to the ventilation duct.
– equipped with a high pressure pump
– equipped with a bilge pump
– automatic control for ventilation blower
